The 1110DX makes serger sewing easy! Incorporating the differential feed system of two feed dogs, puckered edges on woven fabrics and stretched edges on knits are virtually eliminated. The rolled hem conversion feature eliminates the need to change the needle plate, foot, or tension setting for rolled hemming. Restructured lower looper guides allow easy access. The included threading card and color-coded guides are easy to follow for 2, 3, or 4 thread serging.
Easy to Follow Upper Thread Guides
The Threading Chart and Color-Coded Guides are easy to follow for 2, 3, or 4 thread serging.
Adjustable Cutting Width
By turning the dial, you can easily adjust the desired cutting width.
Easily Retractable Upper Knife
Simply press in the knob and push the knife down to deactivate.
Easy to Reach Lower Looper Guides
Threading the Lower Looper is a breeze when you have easy access. Just rotate the thread guide and the lower looper thread guides pop into view.
Quick Change Rolled Hem
No need to change the needle plate for rolled hemming. Just slide the needle plate to “R” position and choose “RH” on the lower looper pre-tension slider.
Dual Feed Dogs
The 1110DX has a Differential Feed Device with two feed dogs, virtually eliminating puckered edges on woven fabrics and stretched edges on knits.
Janome 1110DX Serger
2 and 3 / 4 thread overlock
Regular type needle
1 - 5mm seam length
3.5mm (regular); 5.7mm (wide); 2.0mm (narrow) seam width
0.5 - 2.25 differential feed ration
Front and back needle guard
Color coded thread guides
Snap-on presser feet
Electronic speed control
Easy to follow upper thread guide
Dual feed dogs and differential feed
Adjustable cutting width
Easily retractable upper knife
Easy to reach lower looper guides
Quick change rolled hem
Solid metal base plate
Skeleton Body Construction
Lay-in Tension Dial
Maximum Speed: 1,300 spm
Incorporated Tension Release Device
Incorporated Rolled Hem Changed Over Device
Adjustable Foot Pressure (Adjusting Screw)
Snap-on Presser Foot
Feed Adjustment: Dial on Belt Cover (with Window)
Differential Feed Adjustment: Dial on Belt Cover (with Window)
Dial Cutting Width Adjustment
Alined Spool Pin Spool Stand
Carrying Handle: Part of Machine Body
Thread Cutter (Underneath the Face Plate)
Length of Feet: 1 to 5 mm
Cutting Width: 3.1 - 7.3 mm
Waste Chip Box
Accessory Box
Foot Controller